How to change punctured wheel of a car

Before your start replacing the punctured wheel get these things ready.

• Jack and It’s handle
• Spanner to unscrew
• Good wheel (of course!)

Now let’s do it.
Step 1 :- Park the car on a flat ground.
Step 2 :- Put it in first or reverse gear and turn off the car so that it doesn’t move.
Step 3 :- Next step is to remove the wheel cap. Generally the wheel caps are not fixed with screws(check next step if it is fixed with screws). So try to slowly pull out  the cap from different points on cap. There will be one point where the cap will be loose and you can easily pull out the wheel cap from there.
Step 4 :- Some wheel caps may be fixed with the screws of wheel.  To loosen the screws, you will have to unscrew them in anticlockwise direction using a spanner. When you loosen the screws, unscrew the one’s opposite to each other first instead of side-by-side. Don’t remove the screws completely now. It will be done in next steps.
Step 5 :- Take a picture of the wheel which you want to replace. This will help if you have any confusion while putting the good wheel or screws back.
Step 6 :- Fix the jack below the car near the punctured wheel. Refer to the car manual if you don’t know how to use the Jack. Ensure that you don’t put jack below the plastic parts. It should be below the metal body of the car. Lift the car with jack using the jack handle only after you have slightly loosened the screws as the wheel may just keep on rolling if it’s already in air.
Step 7 :- Punctured tire should be in air now, approximately a centimeter above the ground. Once you have loosened and removed all the screws remove the punctured tire. The wheel may be tight so give it some strokes and try to pull it out. Be careful while pulling out  as the wheel can be heavier than you expect.
Step 8 :- Get the good wheel from the back of your car and put it in the place from where you removed the punctured wheel.
Step 9 :- Tighten up the screws just with hands to ensure that the wheel is fitted properly.
Step 10 :- Now wind the jack down to ensure car wheels are resting on ground.
Step 11 :- Tighten the screws with spanner using your hand first and later with foot to ensure its tightened properly.
Congrats you have successfully replaced a punctured wheel. That’s all folks!

Solved: How to disable call forwarding in Android

In this post we will discuss how to disable call forwarding in an Android phone.

• Click on the “Phone” icon in menu.
• In the top right, click on three vertical dots .
• Click on “Settings”
• Click “Calling Accounts”
• Select the SIM for which you want to disable call forwarding.
• Select “Call Forwarding”
• Select the option for which you want to disable call forwarding, like “Always Forward” or “When Busy” or When Unanswered” or “When Unreachable” .
• Click “Turn off”

Later if you wan to enable call forwarding please refer this post.

That’s All Folks!

How to prepare for Certified Scrum Master exam

Hello!
Below we are sharing the detailed steps for becoming CSM.
In the current fast paced and rapidly evolving software industry it’s very important that you immediately respond to changes and adapt  accordingly. This requires you to be aware of the latest Agile and Scrum practices and follow them. During the last few years, demand for Scrum Master has increased substantially.
What is a Scrum Master?
A Scrum Master is someone who understands the Agile and Scrum concepts and help the team to apply them, so that they are more open to change and respond quickly. His role involves removing any impediments to progress of the team, facilitate meetings, and work with Product Owner. A certification of Scrum Master will help you gain a recognition that you are well versed with the Scrum practices.
Certified Scrum Master certification is conducted by Scrum Alliance.
Requirements and Preparation
Below are steps you will have to follow for becoming CSM.
Step 1:- Before you appear for the exam you will have to attend the mandatory CSM training from a Scrum Alliance Certified Scrum Trainer. Training is a 2 day workshop which covers all aspects of Agile and Scrum needed for clearing the exam. Generally the training cost includes the exam fee and 16 Scrum Education Units(SEUs).
Step 2:- Once you have completed the training appear for the online exam. To clear the exam you will have to correctly answer 24 out of 35 questions.
Exam Pattern
It’s an open book exam which you can give from your home also. You just need a desktop/laptop and access to internet. Exam is objective based. Around 70% is the passing score for exam. Most of the questions you will get will be covered in the class room training under different scenarios. Questions in exam are based on the Agile and Scrum best practices. Some questions are direct while many are scenario based.
Cost
Total cost of exam + training comes to around USD 1299 in USA and around Rs 25000 in India.
Practice Questions
You can refer to some good practice exam questions here.

Certified Scrum Master Sample Exam Questions

In our last post we have seen how to prepare for CSM exam and the efforts and  cost involved in it.
Below are some of the sample questions for CSM exam. You can get many such practice questions here .
Which of the following is a characteristic of a good Scrum Team?
A) Its members all have similar skills.
B) It waits for tasks to be assigned to it.
C) It seeks direction from the ScrumMaster.
D) It is self-organizing.
Answer D
Which of the following is a responsibility of the product owner?
A) Determine the team composition necessary for success
B) Determine the appropriate release dates
C) Determine the appropriate solution or approach for the product
D) Determine the length of the sprint
Answer B
Which technique might a ScrumMaster use to facilitate communication between the Development Team and the Product Owner?
A) Teach the Product Owner about the development processes employed by the Development Team during the Sprints.
B) Teach the Development Team to communicate in terms of business needs and objectives.
C) Facilitate collaborative meetings between the Development Team and the Product Owner.
D) All of these
Answer D
Q:”The CEO asks the Development Team to add a “very important” item to the current Sprint. What should the Development Team do?”
A) Add the item to the current Sprint without any adjustments.
B) Add the item to the current Sprint and drop an item of equal size.
C) Add the item to the next Sprint.
D) Inform the Product Owner so he/she can work with the CEO.
Answer D
What are the desirable qualities of a Product Vision?
A) Outlines traceability back to overall corporate governance in IT investment
B) Provides a complete breakdown structure of the ROI formula
C) Features a detailed overview that enlightens and inspires
D) Describes why the project is pursued and the product desired end state
Answer D
Above questions are taken from public internet and answers are based on our understanding. Please contact us if you have any query or concern.

Solved: How to enable call forwarding in Android

In this post we will discuss how to start call forwarding in an Android phone.

• Click on the “Phone” icon in menu.
• In the top right, click on three vertical dots .
• Click on “Settings”
• Click “Calling Accounts”
• Select the SIM for which you want to enable call forwarding.
• Select “Call Forwarding”
• Select the forwarding option like “Always Forward” or “When Busy” or When Unanswered” or “When Unreachable”
• It will ask for the number on which the call should be forwarded.
• After entering the number click “Turn On”

Please note that these settings can be enabled only if your mobile operator allows this service. Some operators may charge you extra for enabling this service.

Later if you want to disable call forwarding please refer this post.

That’s All!