Showing posts with label solaris 10 zones change ip address. Show all posts
Showing posts with label solaris 10 zones change ip address. Show all posts

Solved: How to plumb IP in a Solaris zone without reboot

In this post we will discuss how to add an IP to a  running Solaris zone.

If you want to add a new IP address to a running local zone(zcldvds01) you can do it by plumbing the IP manually from the global zone.

root@cldvds-global()# ifconfig aggr1:2 plumb
root@cldvds-global()# ifconfig aggr1:2 inet 10.248.3.167 netmask 255.255.255.0 broadcast 10.248.3.255 zone zcldvds01 up

This change is not persistent across reboot. To make it permanent you will have to make an entry through zonecfg:-

root@cldvds-global()# zonecfg -z zcldvds01
zonecfg:zcldvds01> add net
zonecfg:zcldvds01:net> set physical=aggr1
zonecfg:zcldvds01:net> set address=10.248.3.167
zonecfg:zcldvds01:net> end
zonecfg:zcldvds01> verify
zonecfg:zcldvds01> commit
zonecfg:zcldvds01> exit

Now if you run "ifconfig -a" in the zone. You should see the new IP plumbed.

Change IP in zone

If you want to change the IP address of a zone you can simply do it by using "remove". If we take above example and we want to change IP from 10.248.3.167 to 10.248.3.175 we will do as below:-

root@cldvds-global()# zonecfg -z zcldvds01
zonecfg:zcldvds01> remove net address=10.248.3.167
zonecfg:zcldvds01> add net
zonecfg:zcldvds01:net> set physical=aggr1
zonecfg:zcldvds01:net> set address=10.248.3.175
zonecfg:zcldvds01:net> end
zonecfg:zcldvds01> verify
zonecfg:zcldvds01> commit
zonecfg:zcldvds01> exit